Outsulation® System Details (DUK107)
An Exterior Wall Insulation and Finish System
Outsulation
Details - Complete Set in PDF format (3,086 KB)
Table Of Contents:
|
(printer
friendly detail cover sheet ) |
PDF File |
| Outsulation System | OS 0.0.01 |
| Grade Level - Termination At Concrete Curb | OS 0.0.02 |
| Foundation - Termination Above Grade | OS 0.0.03 |
| Rough Opening Preparation | OS 0.0.04 |
| Preparation of Opening for Store Front Window | OS 0.0.05 |
| Preparation of Opening for Nail-On Window | OS 0.0.06 |
| Termination at Sill Aluminum Frame | OS 0.0.07 |
| Termination at Jamb Aluminum Frame | OS 0.0.08 |
| Termination at Head | OS 0.0.09 |
| Termination at Head - Solid Substrate | OS 0.0.10 |
| Wall Penetrations | OS 0.0.11 |
| Wood Framing - Expansion Joint at Floor Line | OS 0.0.12 |
| Light Gauge Framing - Expansion Joint at Floor Line | OS 0.0.13 |
| Termination at Parapet - Cap Flashing | OS 0.0.14 |
| Termination at Parapet - Solid Substrate | OS 0.0.15 |
| Parapet/Wall Termination | OS 0.0.16 |
| Soffit with Drip | OS 0.0.17 |
| Soffit Router Cut Drip | OS 0.0.18 |
| Soffit with Expansion Joint | OS 0.0.19 |
| Soffit - Uninsulated | OS 0.0.20 |
| Outside Corner | OS 0.0.21 |
| Outside Corner - High Impact | OS 0.0.22 |
| Structural Expansion Joints | OS 0.0.23 |
| Expansion Joint - Dissimilar Substrates | OS 0.0.24 |
| Structural Expansion Joint - Inside Corner | OS 0.0.25 |
| Structural Expansion Joint - Outside Corner | OS 0.0.26 |
| Penetrations | OS 0.0.27 |
| Sign Attachment | OS 0.0.28 |
| Outsulation Over Metal Lath Substrate | OS 0.0.29 |
| Aesthetic Reveals | OS 0.0.30 |
| Projecting Graphics | OS 0.0.31 |
| Recessed Graphics | OS 0.0.32 |
| Termination at Deck - Section | OS 0.0.33 |
| Termination at Deck - Cut Away | OS 0.0.34 |
| Termination at Sloped Roof | OS 0.0.35 |
| Termination at Roof Stop Flashing | OS 0.0.36 |
Dryvit makes no representation regarding conformity of its suggestions to model building codes, engineering criteria, specific applications or project locations. All components indicated in illustrations, as well as others that may be required for the integrity of the system shall be designed, detailed and engineered by representatives of the architect, owner or contractor to be in conformance with model codes, architectural and engineering requirements pertaining to specific building projects.
Dryvit makes no warranty, expressed or implied, as to the architectural design, engineering, or workmanship of projects utilizing Dryvit Systems or products.
The liabilities of Dryvit shall be as stated in the Dryvit standard warranty. Contact Dryvit for a full and complete copy of this warranty.
06-2005