Outsulation® System Details (DS107)
An Exterior Wall Insulation and Finish System

Printer Friendly Set of Outsulation Details in PDF format (1,466 KB)
Printer Friendly Set of Outsulation Details in DWG format (5,587 KB)

Table Of Contents:


PDF File

Table of Contents Print
Detail Cover Sheet Print
System Details

PDF File

Outsulation System OS 0.0.01
Outsulation System Starter Board Option OS 0.0.01a
Opening Preparation- AquaFlash® System Option OS 0.0.02
Inside/Outside Corners OS 0.0.03
Outside Corner - High Impact OS 0.0.04
Grade Termination OS 0.0.05
Termination at Concrete Curb OS 0.0.06
Termination at ADA Compliant Sidewalk OS 0.0.07
EPS Preparation at Wall Penetrations OS 0.0.08
Preparation of Opening for Storefront Window OS 0.0.09
Preparation of Opening for Nail-On Window OS 0.0.10
Window Head OS 0.0.11
Termination at Wood Framed Deck OS 0.0.12
Termination at Waterproof Deck OS 0.0.13
Preparation at Parapet/Wall Intersection OS 0.0.14
Termination at Parapet - Cap Flashing OS 0.0.15
Termination at Parapet - Solid Substrate OS 0.0.16
Termination at Sloped Roof OS 0.0.17
Vertical Wall/Suspended Soffit Transition OS 0.0.18
Transition at Soffit/Fascia Intersection OS 0.0.19
Fascia/Uninsulated Soffit Transition OS 0.0.20
Termination at Uninsulated Soffit Vent OS 0.0.21
Horizontal Joint at Floor Line OS 0.0.22
Horizontal Joint - Substrate Change OS 0.0.23
Horizontal Termination at Stone Veneer OS 0.0.24
Horizontal Termination at Stucco OS 0.0.25
Horiztonal Termination at Wood Siding OS 0.0.26
Vertical Expansion Joint - EIFS OS 0.0.27
Through-Wall Expansion Joint OS 0.0.28
Vertical Expansion Joint - Flush and Recessed Options OS 0.0.29
Vertical Expansion Joint - Double Seal Option OS 0.0.30
Vertical Termination At Stone Veneer OS 0.0.31
Penetrations OS 0.0.32
Sign Attachment OS 0.0.33
Aesthetic Reveals OS 0.0.34
Recessed Graphics OS 0.0.35
Projecting Graphics OS 0.0.36

Dryvit makes no representation regarding conformity of its suggestions to model building codes, engineering criteria, specific applications or project locations. All components indicated in illustrations, as well as others that may be required for the integrity of the system shall be designed, detailed and engineered by representatives of the architect, owner or contractor to be in conformance with model codes, architectural and engineering requirements pertaining to specific building projects.

Dryvit makes no warranty, expressed or implied, as to the architectural design, engineering, or workmanship of projects utilizing Dryvit Systems or products.

The liabilities of Dryvit shall be as stated in the Outsulation Limited Commercial Warranty.  Contact Dryvit for a full and complete copy of the warranty.

back to top

Last Updated: 01-2015