Rapidry DM™ 50-75

Fast Setting, Dry Mix, Polymer-Modified, Cementitious Adhesive and Base Coat

Rapidry DM 50-75 is a fast setting, dry mix, polymer-modified, cementitious adhesive and base coat for use with Dryvit systems.

Rapidry DM 50-75 is used to adhere expanded polystyrene insulation board to acceptable substrates and to embed reinforcing mesh as part of the base coat for Dryvit systems. It is specifically engineered to use when job site temperatures will be between 50°F (10°C) and 75°F (24°C). It dries faster than traditional EIFS adhesives and base coats while providing an adequate working time. Use of Rapidry DM 50-75 is not recommended if temperature is to exceed 75°F (24°C). The rapid cure time of Rapidry DM 50-75 permits two installation steps to be completed during one workday, i.e., insulation board installation and rasping or base coat and finish application.

  • Vapor Permeable
  • Dry polymer modified
  • Fast set adhesive and base coat
  • One component
  • Smooth consistency
  • Temperature specific formulation
  • Does not allow moisture to build up
  • Excellent durability, adhesion
  • Adhere EPS + base coat in same day
  • Ready to use, just add water
  • Trowels easily thus more production
  • Use when air+wall temp is between 50°F-75°F